磁力傳動的基本原理
The Principle of Magnetic -driving Pumps:

      磁傳動部分由內、外磁轉子組成；隔離套將內磁轉子及介質與外磁轉子隔絕；外磁轉子由電機傳動，轉動時利用磁耦合特性帶動內磁轉子旋轉，完成非接觸的力矩傳遞，從而達到傳動泵的目的。
    Magnetic-driving parts are composed of magnetic in-rotor and magnetic out–rotor; Magnetic in-rotor and medium are cut off from magnetic out-rotor by a shroud. Magnetic out-rotor is driven by motor; when magnetic out-rotor runs, magnetic in-rotor begin to run because of magnetic coupling characteristics. So pumps are driven by the way of non -contact transmission of moments.      

    磁傳動泵有別于其他機械密封泵，無動密封，只有靜密封，從根本上解決了流程中機械密封泵的跑、冒、滴、漏問題，做到了完全無泄露。

    Magnetic-driving pumps are different from other pumps with mechanic seals by replacing dynamic seals with static seals. Solve absolutely leakage problem during pumps running.

    磁力泵結構簡單緊湊、采用了獨特的潤滑及冷卻回路，一部分工藝液體自潤滑及冷卻傳動部件，省去了機械密封泵所需的冷卻、沖洗、急冷等繁雜的管路系統。設計入口壓力最大可至30Mpa，機械密封泵很難做到這一點。

    The structure of magnetic-driving pumps is simple. The design of special lubricant and coolant circuit guarantees satisfactory lubrication and cool-off. No cool-off, swill, quick-cool pipe system that pumps with mechanical seals require. Rated suction pressure can reach to 30MPa; it is difficult for pumps with mechanical seals to do.

    磁力泵運行安全可靠，噪音低、無泄露，工藝現場清潔安全，是真正意義上的工業環保型產品

     Running slick and stably, low noise, non-leakage, cleanness and safety, magnetic-driving pumps are rewarded as real environmental protection products in industries